GHA, compensating three-jaw chuck with mandrel
GHA-3B-160.00/1
| Type | GHA, compensating three-jaw chuck with mandrel |
|---|---|
| Article no. | 160.153 |
| Actuation | Hydraulic |
The GHA-3B-160.00/1 is a compensating three-jaw chuck. A clamping sleeve centres the workpiece, and the three jaws clamp it with compensation. A seating check verifies the workpiece position. Lubrication is applied manually through grease nipples on the base jaws.
Technical features
- 4.5 mm jaw stroke at a chuck size of 160 mm
- Force transmission by the wedge-hook principle
- Steel construction; all wear parts hardened and ground
- Piston with compensating function
Compensating chucks
The GHA-3B-160.00/1 is a compensating three-jaw chuck in which a clamping sleeve centres the workpiece and the three jaws clamp it with compensation.
Compensation is provided by the radially floating clamping piston. A seating check verifies the workpiece position. Lubrication is applied manually through grease nipples on the base jaws.
Technical features
- 4.5 mm jaw stroke at a chuck size of 160 mm
- Force transmission by the wedge-hook principle
- Steel construction; all wear parts hardened and ground
- Piston with compensating function
Combination of different clamping principles
The GHA-3B-160.00/1 is a compensating three-jaw chuck in which a clamping sleeve centres the workpiece and the three jaws clamp it with compensation.
Compensation is provided by the radially floating clamping piston. A seating check verifies the workpiece position. Lubrication is applied manually through grease nipples on the base jaws.
Technical features
- 4.5 mm jaw stroke at a chuck size of 160 mm
- Force transmission by the wedge-hook principle
- Steel construction; all wear parts hardened and ground
- Piston with compensating function
Order
Order this variant
Send us your contact details. We will get back to you with the relevant technical questions.