Referenzen – Geiger Haag

GHHY-2B-300.00/9 Machining axle ends Two GHHY-2B-300.00/9 two-jaw Hydrozent chucks, each measuring 300 mm, are used in this fixture for machining axle ends.

GHZP-195.00/1 Clamping turbocharger components The challenge with this fixture was to implement numerous functions using only four connections. The GHZP-195.00/1 is one of several…

GHYP-180.00/Bl Machining ABS housings This hydraulic multiple-clamping fixture has 12 clamping stations for machining ABS housings. The workpiece is inserted against a spring-loaded stop…

GHM-2B-200.00 Machining gas valves This hydraulic multiple-clamping fixture has 12 clamping stations for machining gas valves. A hand crank provides coarse adjustment of the…

GHHY-2B-250.00/23-2 Machining cams The GHHY-2B-250.00/23-2 is one of many Geiger + Haag clamping fixtures used for machining cams.

GH-2B-80.00/1/A Aligning and clamping connecting rods The GH-2B-80.00/1/A is a power-operated centring element for aligning and clamping connecting rods. Its off-centre clamping jaws reproduce the curved…

GHGLS-3B-70.00 Externally clamping sliding-jaw mandrel This sliding-jaw mandrel clamps the workpiece externally. Spring force provides clamping, and pneumatic pressure releases it.

GHHY-2x2B-400.00 Clamping workpieces of different sizes The GHHY-2x2B-400.00 is a hydraulic double-clamping fixture with an integrated cylinder. It can clamp workpieces of different sizes. The fixture…