Chucks with through-hole

Technical overview

A through-hole in a clamping fixture serves several purposes:
Supplying media such as coolant.
Feeding workpiece material.
Providing tool run-out space for certain machining operations.
Clamping the workpiece deeper in the fixture to reduce the clamping height.
The examples below show through-hole chucks that we have produced.

Variants

5 variants

GHHHY-3B-200.00/1 GHHHY, three-jaw chuck with through-hole This hydraulically actuated three-jaw chuck has an integrated cylinder and through-hole, pneumatic sensing at the workpiece support, unequal jaw spacing,… Chucks with through-hole

GHHHYS-2B-250-30.00/1 GHHHYS, two-jaw chuck with through-hole Hydraulically actuated two-jaw chuck with an integrated cylinder, partial through-hole, blow-off air, sealing air, central lubrication, workpiece support and special… Hydraulic centering chucks

GHHHY-2B-170.00 GHHHY, two-jaw chuck with through-hole This hydraulically actuated two-jaw chuck has an integrated cylinder and a through-hole with a workpiece support. Lubrication is supplied by… Chucks with through-hole

GHHHY-3B-250.00 GHHHY, three-jaw chuck with through-hole The hydraulically actuated GHHHY-3B-250.00 three-jaw chuck has an integrated cylinder. The through-hole is 75 mm in diameter, and the base… Chucks with through-hole

GHHZ-3B-80.00 GHHZ pull-down chuck with through-hole This hydraulically actuated pull-down chuck for external clamping has an integrated cylinder and a 15 mm through-hole. Gripper inserts are… Chucks with through-hole

No suitable variant listed?

Many solutions are developed as variants of existing clamping tools. Send us the key data of your application.

Send technical inquiry