Combination of different clamping principles – Geiger Haag

Combination of different clamping principles

Technical overview

Workpiece clamping requirements are often complex enough to require a combination of several clamping principles.
The examples below show such combinations. We can develop suitable variants of our basic models or new clamping tools to meet your individual requirements.

Variants

8 variants

GHA-3B-160.00/1

GHA-3B-160.00/1 GHA, compensating three-jaw chuck with mandrel The GHA-3B-160.00/1 is a compensating three-jaw chuck. A clamping sleeve centres the workpiece, and the three jaws clamp it with… Sleeve expansion mandrels

GHGLP-2B-60.00

GHGLP-2B-60.00 GHGLP, two-jaw sliding-jaw mandrel with swivel clamps The GHGLP-2B-60.00 is a mandrel with two sliding jaws. The rectangular jaws have a recess at the clamping point. The… Sliding-jaw mandrels

GHHY-2B-225.00/2

GHHY-2B-225.00/2 GHHY two-jaw chuck with safety function A hydraulically actuated two-jaw chuck with a safety function: the workpiece is held by spring preload before final hydraulic clamping.… Hydraulic centering chucks

GHZP-190.00/4

GHZP-190.00/4 GHZP centring and face-clamping chuck The GHZP-190.00/4 is a hydraulically actuated centring and face-clamping fixture with two swivel clamps. It is combined with a three-jaw… Combination of different clamping principles

GHGY-3B-200.00/2/1

GHGY-3B-200.00/2/1 GHGY, three-jaw chuck with swivel clamps This hydraulically actuated three-jaw chuck has an integrated cylinder for external clamping and diamond locating pins for preliminary alignment. Swivel… Hydraulic chucks

GHZP-170.00/W

GHZP-170.00/W GHZP centring and face-clamping chuck with clamping sleeve and swivel clamps This hydraulically actuated centring and face-clamping fixture is used to clamp wheel carriers. A clamping sleeve centres the workpiece, and… Sleeve expansion mandrels

GHHY-2B-300.00/9

GHHY-2B-300.00/9 GHHY, two-jaw chuck Two GHHY-2B-300.00/9 two-jaw Hydrozent chucks, each measuring 300 mm, are used in a fixture for machining axle ends. Hydraulic centering chucks

GHZP-195.00/1

GHZP-195.00/1 GHZP centring and face-clamping chuck with sliding-jaw mandrel The challenge with this fixture was to implement numerous functions using only four connections. The GHZP-195.00/1 is one of several… Three-jaw power chucks

No suitable variant listed?

Many solutions are developed as variants of existing clamping tools. Send us the key data of your application.

Send technical inquiry